Oszcilloszkóp sávszélesség és felfutási időOscilloscope bandwidth and rise time
Az oszcilloszkóp névleges sávszélessége nem azt jelenti, hogy a határfrekvencián még hibátlan amplitúdót mér. A szabványos meghatározás szerint ezen a ponton a válasz már jellemzően 3 dB-lel csökkent.An oscilloscope rated bandwidth does not mean perfect amplitude measurement at that frequency. Under the standard definition, response at the bandwidth limit is typically already 3 dB down.
A −3 dB pontThe −3 dB point
Egypólusú jellegű rendszerben a −3 dB pontnál az amplitúdó körülbelül 70,7%-a az alacsony frekvenciás értéknek. Pontos amplitúdóméréshez ezért lényegesen nagyobb sávszélesség kell, mint a vizsgált jel legmagasabb fontos frekvenciája.For a single-pole-like system, amplitude at the −3 dB point is about 70.7% of the low-frequency value. Accurate amplitude measurement therefore requires bandwidth substantially above the highest important signal frequency.
Felfutási idő kapcsolataRelationship to rise time
Gauss-jellegű rendszerben gyakran a tr ≈ 0,35/BW összefüggést használjuk. Ez közelítés; modernebb lapos amplitúdómenetű oszcilloszkópoknál más állandó lehet megfelelő.For Gaussian-like systems, tr ≈ 0.35/BW is often used. It is an approximation; modern maximally flat oscilloscopes may require a different constant.
Oszcilloszkóp és mérőfej együttScope and probe as a system
A teljes mérőrendszer sávszélessége mindig kisebb a külön elemek névleges sávszélességénél. A mérőfej kapacitása, kábelezés, adapterek és földelési hurok a jelalakot is torzíthatja.Overall measurement-system bandwidth is always lower than the individual component ratings. Probe capacitance, cables, adapters and ground loops can also distort waveform shape.
Kalibrálási megközelítésCalibration approach
A sávszélesség ellenőrzése ismert amplitúdójú, frekvenciában változtatott szinuszos jellel vagy gyors élű impulzussal történhet. A módszernek és referenciaeszköznek lényegesen jobb teljesítményt kell biztosítania a vizsgált oszcilloszkópnál.Bandwidth can be verified using a known-amplitude swept sine signal or fast-edge pulse. The method and reference system must provide significantly better performance than the oscilloscope under test.
Kapcsolódó szakmai útmutatókRelated technical guides
Kalibrálási programot tervez?Planning a calibration programme?
Küldje el a műszer gyártóját, típusát, kritikus funkcióit és tartományait. Mérnökeink a tényleges alkalmazáshoz illeszkedő mérési programot javasolnak.Send the instrument manufacturer, model, critical functions and ranges. Our engineers will propose a measurement programme matched to the actual application.
Ajánlatot kérekRequest a quote