EIT Power Puck II calibration in Europe
Instrument category: Multi-band UV curing radiometer.
LightingLab supports European industrial and laboratory customers with UV measurement instrument calibration enquiries. The correct service depends on the exact detector, wavelength response, measurand and accredited scope.
Measurement-specific assessment
Why this model needs individual assessment
Individual channels can have different spectral sensitivities; the channel identification is essential when defining a calibration point.
Details to include with the instrument
Record the channel names and requested measurands separately. Do not infer that a single calibration wavelength or channel result validates all channels.
Practical process consideration
For comparison across production lines, record lamp technology, measurement position, exposure conditions and the channel-specific units reported by the instrument.
Calibration versus conformity assessment
A calibration reports measurement results and their uncertainty under defined conditions. A pass/fail statement additionally requires a specified tolerance and decision rule, including any agreed guard band. Neither a conformity statement nor accredited coverage is assumed for this instrument.
Instrument-specific calibration considerations
Check channel-specific irradiance readings and accumulated energy separately; report UVA, UVB, UVC and UVV only where the instrument configuration and laboratory scope permit.
Typical application
UV curing lines, conveyor systems and lamp monitoring.
Information needed for a quotation
- Exact model and detector
- Instrument model, serial number, probe or sensor type and firmware if relevant.
- Measurement requirement
- Requested UV band, irradiance (W/m² or mW/cm²), radiant exposure (J/m² or mJ/cm²), measurement range and reference source.
- Certificate and decision rule
- Specify whether ISO/IEC 17025 accredited results, uncertainty statement or a conformity assessment are required. Availability must be confirmed against the laboratory's current scope.
Request a calibration quotation
Contact LightingLab through the contact page and include the instrument model, sensor, required wavelength band and measuring range.